Install/Remove Antenna; Install Belt Clip - Plastimo VHF SX-400 Manual De Instrucciones

4. Charge by Other Power Supplies
• Charge by computer USB port
NOTE: Few computers do not meet the voltage and cur-
rent as required.
Normal USB Cable(Micro-B)
• Charge by Micro-B adaptor
NOTE: The power supply output should be 5V/1A.
Power Bank
AC Adaptor
Car Charger
Charging Port
Charging
Port
D Install/Remove Antenna
1. Connect the supplied fixable antenna to the antenna con-
nector, rotate it clockwise until it is tight.
2. To remove it, rotate it counter clockwise.
D Install Belt Clip
1. Attach the belt clip to radio rear cover. Ensure the screw
holes are aligned.
2. Screw tightly using Phillips screwdriver.
2
27