Installing The Battery - Sight mark SM25001 Manual Del Usuario

INSTALLING THE BATTERY:

The Sightmark LoPro Green Laser is powered by one CR123A battery. Should the laser grow dim or not activate,
the battery needs to be replaced. To install a new battery:
1) Unscrew the battery cap (1) counterclockwise and remove the battery
2) Insert a new battery with the positive (+) side facing up.
3) Screw the battery cap clockwise. Do not overtighten.
OPERATING THE LASER:
In order to activate the LoPro Green Laser locate the on/off push button (4).
1) Push the button down and a click should be heard. The laser will activate.
2) Repeat step 1. Once the click is heard the laser will deactivate.
In order to activate the LoPro Green Laser with the pressure pad.
1) Locate the pressure pad input jack (5) on the back of the laser housing.
2) Remove the rubber cover from the pressure pad input jack. The rubber cover remains attached to the housing.
3) Insert the pressure pad's jack plug into the input jack.
4) For momentary activation, press firmly on the pressure pad. A click should be heard and felt.
5) To turn the laser off, release pressure off the pressure pad. A click should be heard and felt.
5
DIAGRAMA:
1) Tapa de la batería
2) Apertura del láser
3) Ajuste de corrección por el viento/elevación
4) Botón pulsador
5) Conector de entrada de almohadilla de
presión
6) Perno de montaje
5
4
1 2 3
18