Installing Software - Asus Xonar D-KARA Guia De Inicio Rapido

Connecting to a TV tuner card
1. If you have a traditional PCI TV tuner card on your PC, you may need to connect it
to the Xonar D-KARA card to send the tuner card's sound to your PC speakers.
2. Secure the PCI TV tuner card and screw it into the back-panel.
. Connect the audio output header from the TV tuner card to the Aux-In header of
the Xonar D-KARA card.
For optimum TV audio quality, Xonar D-KARA uses ADC recording to digitize the
signal and loops it back to DAC playback. Select Aux-In as the recording source in the
Xonar D-KARA Center's recording mixer and enable the monitoring button to pass
this signal to the audio output. Using this setup, you can even turn on sound effects
such as Dolby Headphone to expand the stereo TV audio to 5.1 channel surround
sound in any set of headphones. TV audio on your PC will become even better than
on your TV set.

Installing software

Installing the card driver
Ensure that you have installed the audio card before installing the Xonar D-KARA
driver. Otherwise, driver installation error may occur.
1. After you have installed the Xonar D-KARA card, turn on your computer. Windows
automatically detects the audio card and searches for device drivers. When
prompted for the drivers, click Cancel.
2. Insert the support CD into the optical drive. If Autorun is enabled in your system,
the setup starts automatically. If not, run setup.exe from your support CD.
. Follow the onscreen instructions to finish the installation.
The version and content of the support CD are subject to change without notice.
U7299_Xonar D-Kara QSG.indb 7
ASUS Xonar D-KARA
®
7
06.04.2012 15:54:02 Uhr