Charging The Battery Pack - Toolland TM82001 Manual Del Usuario

 Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
 Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the
device against damage by leaving it switched off until it has reached room temperature.
 Keep this manual for future reference.
4. Features
 ergonomic soft grip
 LED work light
 LED display for battery capacity
 metal hook for easy storage
 spindle-lock function
 included: ● 2x Li-ion battery ● 1x fast charger ● 1x BMC
5. Overview
Refer to the illustrations on page 2 of this manual.
1 keyless chuck
2 adjustable torque clutch
3 direction switch
6.

Charging the Battery Pack

Do not puncture batteries or throw them in fire as they may explode. Do not
attempt to recharge non-rechargeable batteries (alkaline). Dispose of batteries in
accordance with local regulations. Keep batteries away from children.
Place the battery pack and charger on a flat, non-flammable surface and away from
1. Insert the plug of the charger into the mains.
2. Connect the battery pack to the charger.
V. 01 – 18/08/2016
TM82001/TM82002
WARNING
WARNING
flammable material during charging.
5
4 work LED
5 power trigger
6 belt hook
©Velleman nv