Maintenance Defrosting / Cleaning / Changing The Light Bulb - Kuppersbusch IKEF 248-5 Istrucciones Para El Uso

Ocultar thumbs Ver también para IKEF 248-5:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 55
Not to be placed in the 0¡C compartment:
¥ cold sensitive fruit which have to be stored at cellar
or room temperature like pineapple, bananas,
grapefruit, melons, mango, papaya, oranges,
lemons, kiwi fruit.
¥ The types of food not mentioned above should be
stored in the refrigerator compartment (e.g. all
sorts of cheese, cold cuts, etc.).
Maintenance
Unplug the appliance before carrying out
any maintenance operation.
Warning
This appliance contains hydrocarbons in its
cooling unit maintenance and recharging must
therefore only be carried out by authorised
technicians.
Defrosting
¥ Defrosting the refrigerator compartment is
automatic. The defrost water drains out through a
trough into a container at the back of the appliance,
above the motor compressor, where it evaporates.
Cleaning
Never use metal objects for cleaning your
appliance as it may get damaged.
NEVER use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as these will
damage the surface and leave a strong
odour.
Clean the inside with warm water and bicarbonate of
soda. Rinse and dry thoroughly.
0¡C compartment
¥ The lowest shelf, dividing the cooler compartment
from the
0¡C compartment can be removed for
cleaning. To remove pull out the shelf straight.
The cover plates above the drawers in the 0¡C
compartment can be taken out for cleaning. To
make
sure
fully
0¡C compartment the cover must be put back in
their original position after cleaning.
When the appliance is not in use
Disconnect the appliance from the electricity supply.
Empty all foods and clean the appliance, leaving the
doors ajar to prevent unpleasant smells.
18
functionality
of
Changing the light bulb
¥ Should the interior light fail to work, first switch off
the appliance and disconnect from the electricity
supply.
¥
Press on the rear hook and at the same time slide
the cover in the direction indicated by the arrow.
Replace the lamp with one of the same power
(the maximum power is shown on the light
diffuser).
the

Publicidad

Tabla de contenido
loading

Tabla de contenido