KS LEV Ci Manual De Instrucciones página 22

FOR THE FIRST TIME
When using your seat post for the first time, it may be necessary to
give the post a firm downward "nudge" to start the initial
movement. This is due to the seal's natural tendency to migrate
oil away from the seal surface. This is only necessary prior to the
first use or after a long period of non-use. Once the post is cycled
through its travel the first time, it will distribute oil on the seal and
resume its normal function.
RAISING AND LOWERING THE SADDLE
To lower the saddle, weight the saddle firmly with your hand or sit
on the bike while pressing and holding the actuation lever or
remote. Release the lever when the desired height is reached.
To raise the saddle, actuate your seat post by pulling the lever or
handlebar remote. Unweight the saddle and release the lever
when the desired height is reached.
You can raise and lower your saddle to any desired position
within the seat post's travel.
USING YOUR SEAT POST
18
20