Installation And Assembly; Supra ® -Filter Internal With Straight Outlet - Garantia SUPRA 202559 Instrucciones De Instalación Y Mantenimiento

®
4.1 SUPRA -Filter internal with straight outlet
The SUPRA®-Filter Internal is prepared as shown
in the adjacent depiction.

The filter housing is connected via the on site
installed canalisation pipe

well (included in the SUPRA add on packet).
The couplings should be secured with commercial
self tapping screws.
Following this a 114 mm long inlet

and outlet pipe as well as the

overflow siphon are pushed in to
the Cristall underground tank until
the end stop position as shown in
the adjacent depiction.
Now the prepared SUPRA
internal is installed in the tank. The
inlet and outlet pipe have to be
positioned that it is flush with the
filter inlet and then finally fixed in
place with the quick assembly collar.
Under no circumstance may a mesh
barrier be installed in the outlet pipe
to prevent small animals entering the
tube. This will eventually lead to a
blockage from debris in the pipe.
info@garantia.eu
www.garantia.eu
4.

Installation and assembly


to the stabilising inlet
SUPRA-Filter
®
-Filter
Inflow
1

 2
L
114
Inflow
internal
10 / 24
®
SUPRA -Filter
with straight outlet
Pipe length with bush:
1600 L = 1100 mm
2650 L = 820 mm
(
all dimensions +/- 3% tolerance

3
settled inlet basked
Telescopic
dome shaft
114
Outflow
Siphon
Telescopic
dome shaft
Outflow
Siphon
internal
)