quence. Press the MODE button to move from one setting to another. After
setting the alarm, wait a few seconds for the return to normal operation.
SNOOZE FUNCTION AND ALARM DEACTIVATION
1. To activate / deactivate the alarm, touch the DOWN key (the AL indication
appears / disappears on the display).
2. During the alarm sound, press the DOWN key to momentarily stop the alarm
(SNOOZE). After 5 minutes the alarm will resume.
3. During the alarm sound, press the MODE key to stop the alarm permanently.
The alarm will remain active and will sound 24 hours later.
Without any intervention the alarm will sound for 2 minutes.
TEMPERATURE DISPLAY
Touch the MODE key to display the room temperature.
While viewing the temperature, press the UP key to switch between Celsius
and Fahrenheit degrees.
DIMMER FUNCTION (DISPLAY BRIGHTNESS ADJUSTMENT)
It is possible to adjust the brightness of the display on 3 levels (high, medium,
low).
While displaying the time, touch the UP key to change the brightness of the
display.
NIGHT MODE FUNCTION
With this function it is possible to set the automatic lowering of the display
brightness during the night hours.
At a set time (default from 18:00 to 6:00) the brightness decreases at night and
then returns to normal during daylight hours.
To activate this function, touch the MODE key 3 times and touch the DOWN
key until the word ON (active) or OFF (not active) appears on the display.
To set a different time to the factory setting, during the ON display long press
the MODE key and adjust in sequence, using the UP and DOWN keys, the hour
and minutes of activation and the hour and minutes of ending of the NIGHT
MODE function.
TECHNICAL FEATURES
Power supply: ................................................... 5V
................................................................................. power adaptor100-240V~50/60Hz
Back up battery: ................................................ 3x AAA 4,5V
Consumption: ................................................... 5W
TREVI pursues a policy of continuous research and development. Therefore
the products may have different characteristics from those described.
EC 883 BL
1A
_7