Bluetooth Connection - Mifa A10 Manual Del Usuario

06
Ports Functions
Micro USB port
• Charging: use a DC 5V / 1A adaptor or connect it to a computer to charge the speaker
• Data transmission: in the powered-off state, insert a Micro-SD card and connect it to a computer. Press
and hold the power button for 2 seconds to turn it on. Then you can manage music files in the card on the
computer.
Aux-in jack
• In the powered-on state, insert an audio cable.
It will beep to indicate a successful connection.
• To reset the speaker, press the reset button in
the jack with a needle.
MICRO Micro SD Card Slot
SD
In the powered-on state, insert a Micro-SD card
into the slot. It will play the music stored in the
card automatically after two beeps.
07
English

Bluetooth Connection

1. Turn on the speaker
Press and hold the power button for more than 2
seconds until it issues a sound of DingDong and
then a sound of Ding with a flashing white LED
light. It enters the pairing mode.
2. Connect it to your device
Turn on the Bluetooth of your device and select
Mifa_A10. Once the connection is completed, it
will beep and the white LED light will stay on.
• The speaker will connect to the last-connected
device automatically once the device's
Bluetooth is turned on.
Other Instructions
• To connect to another device, press and hold the
Bluetooth button for 2 seconds. The paired one will be
disconnected and the speaker will enter the pairing mode
• To reconnect it to the last used device, short press the
Bluetooth button.
English
.