Weighing With Pre-Tare - Seca 685 Manual De Instrucciones Y Garantía

Weighing with pre-Tare

If the pre-Tare function is activated, a stored weight value is deducted from the current-
ly measured weight. This function is useful, for example, if the weight of a wheelchair
is not to be displayed.
– Press the Start key.
se(a 8. 8 . 8 . 8 . 8 .
,
secutively in the display. The scale is
then automatically set to zero and rea-
dy for operation.
– Press the FUNC key. The last function
used appears in the display.
– Use the arrow keys to select the pre-
Tare function FU 3.
– Activate the function by pressing the
FUNC key once again.
In the display you will see the tare va-
lue from the memory.
– You can use the arrow keys to adjust
the value in increments according to
the graduations displayed.
– Once the correct value is set, press the
FUNC key again. The pre-Tare func-
tion is now activated.
– Move onto the scale in the wheelchair
associated with that memory. Read
the weighing result off the digital display.
– To return to normal weighing mode,
press the FUNC key.
– To switch off the scale, press the Start
key again.
Tip:
Note weight on your wheelchairs.
38
0. 0
and appear con-