Kenwood kMix BLX75 Instrucciones página 6

to use your blender
1 Fit the sealing ring e into the
blade unit f - ensuring the seal
is located correctly in the grooved
area.
Leaking will occur if the seal
l
is damaged or incorrectly
fitted.
2 Clip the blade unit f into the base
g.
3 Screw the blade assembly onto
the goblet – ensuring the blade
assembly is fully tightened 2.
Refer to the graphics on the
underside of the blade unit as
follows:
- unlocked position
- locked position
4 Put your ingredients into the
goblet.
5 Fit the filler cap to the lid and push
down to secure.
6 Fit the lid by pushing down until
secure.
7 Place the blender onto the power
unit 3.
The appliance will not work
l
if the blender is incorrectly
fitted.
8 Plug in and the indicator light will
remain unlit whilst in the "O" OFF
position. Turn the speed control
to select a speed (refer to the
recommended usage chart).
Select a speed between 'Min' to
l
'Max' by turning the speed control.
At the end of blending return the
speed control to "O" OFF before
removing the blender.
Do not remove the goblet until the
l
blades have stopped rotating and
the speed control is in the "O" OFF
position.
(P) Pulse – operates the motor in
l
a start/stop action. The pulse will
operate for as long as it is held in
position.
Note: If the blender is removed
from the power unit whilst a
speed is selected the Indicator
light will go out and the blender
will stop. The blender willl restart
immediately if refitted.
hints
To blend dry ingredients - cut into
l
pieces, remove the filler cap, then
with the machine running, drop the
pieces down one by one. Keep
your hand over the opening. For
best results empty regularly.
The processing of spices is not
l
recommended as they may
damage the plastic parts.
When making mayonnaise, put all
l
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the appliance running,
add the oil slowly through the hole
in the lid.
Thick mixtures, e.g. pâtés and dips,
l
may need scraping down. If the
mixture is difficult to process, add
more liquid.
Refer to the troubleshooting
section if you experience any
problems with the operation of
the blender.
6