Operating Instructions; Location And Function Of Controls - Goldstar GW6010ER Manual Del Propietário

Operating Instructions

Location and Function of Controls

CAUTION: If you turn off the air conditioner or switch from cooling to
the fan, wait at least 3 minutes before setting to cooling again.
Operation
Off
High
Fan
Low
Fan
Thermostat
5
4
6
3
2
1
FOR NORMAL COOLING
1. Turn the operation switch to the High Cool or the Low Cool setting.
2. Set the thermostat control to the desired temperature mark (the mid-point is a
good starting position). If the room temperature is not satisfactory after a
reasonable time, adjust the control to a cooler or warmer setting, as
appropriate.
FOR MAXIMUM COOLING
1. Turn the operation switch to the High Cool setting.
2. Set the thermostat control to the largest temperature mark.
FOR QUIETER OPERATION
1. Turn the operation switch to the Low Cool setting.
2. Set the thermostat control as needed.
Off
High
High Fan - High speed fan operation without cooling.
Cool
Low Fan
Low
High Cool - Cooling with high speed fan operation.
Cool
Low Cool - Cooling with low speed fan operation.
This automatically controls the temperature of the indoor air.
Turn the knob so that arrow points to the larger marks for greater
7
cooling. Point the arrow to the smaller marks for more moderate
cooling.
8
(i.e. the higher the number, the greater the cooling)
9
- Turns air conditioner off.
- Low speed fan operation without cooling.
Operating Instructions