Conceptronic Full HD Media Player CFULLHDMA Manual Del Usuario página 38

ENGLISH
Audio Setup
- Digital Audio Output
- Analog Audio Output
Video Setup
- Brightness
- Contrast
- Hue
- Saturation
Other Settings
- Screen Saver
- Photo Display Setup
- Side Show Time
- Music Auto Play
- Video Resume Playing
- Play Next Video
When the settings are changed, press the 'Back' (8) button on the remote control to return to the main
Setup menu.
6.3 Version
In the 'Version' menu, you can see the current firmware version or upgrade your firmware.
Reset To Default
Firmware Upgrade
- Internet Upgrade
- USB Upgrade
Note: Do NOT power off the unit when you are upgrading the firmware. This will damage the unit and
makes it unusable!
When the settings are changed, press the 'Back' (8) button on the remote control to return to the main
Setup menu.
When you are finished with the Setup of the unit, press the 'Back' (8) button or the 'Home' (27) button
on the remote control to return to the main menu.
Set the output signal for the digital output. (Off, RAW or PCM)
Set the output signal for the analog output. (Stereo, Mono L/R, Mix Mono)
Change the brightness of the output signal.
Change the contrast of the output signal.
Change the hue of the output signal.
Change the saturation of the output signal.
Set the inactivity time for the screensaver. (Off, 1~30 minutes)
Change the way photo's are shown. (List, Thumbnail)
Change the time between 2 photo's in a slideshow.
(1~30 seconds, 1~3 minutes)
Change the Music Autoplay mode. (Off, One Time, Repeat)
Change the Video Resume mode. (Ask, Always, Off)
Play the next video when a video is finished. (Enable, Disable)
Set the unit back to the factory default settings.
Upgrade the firmware through the internet. The unit will automatically
search online for a new version if the unit is connected to the internet.
Upgrade the firmware through a USB storage device.
38