1
Locate the correct iPod
to use as shown on pages 16-17. Insert
the dock into the cavity (as shown),
making sure the tabs are facing front,
and slip the tabs into place.
3
If using the dock: Insert the iPod
the holder. Gently push down so the
connector on the iPod
connector on the Mi4004. If the Mi4004 is
turned off, once you connect the iPod
will start charging the battery until it is full.
If the Mi4004 is turned on and in
AM/FM/LINE IN mode, once the iPod
connected, the Mi4004 will change to
iPod
mode automatically. Then, if you
®
disconnect the iPod
revert back to the AM/FM/LINE IN mode.
When the iPod
®
Mi4004, it will be in the Pause mode.
NOTES:
•
CHARGING: When the iPod
off, the iPod's
•
CHANGING THE MODE: If units are connected to the dock AND the LINE IN jack,
you can press the iPod
(dock)/LINE IN/AM/FM mode as desired. (You will not be able to select between
iPod/LINE IN mode, if there is no device or iPod
iPod
dock.) To turn off the unit, press the Power button.
®
INSERTING AN IPOD
Universal Dock
®
®
slides onto the
®
, the Mi4004 will
®
is connected to the
is inserted into the dock, whether the Mi4004 is on or
®
battery will charge until it is full.
®
/LINE IN or AM/FM button repeatedly to select between iPod
®
2
Press the rear side of the holder until it
is positioned inside the cavity.
NOTE: To remove the holder, insert
your finger (or other object) into the gap
in the holder, then gently pull the holder
out to remove it.
4
onto
If using the LINE IN jack: Insert an audio
cable (not included) into the LINE OUT jack
on your player and the other end into the
LINE IN jack on the rear of the Mi4004.
Press the Power button to turn this unit on,
, it
®
then press the iPod
select the LINE IN mode. The external
player's output sound will be heard through
is
®
the Mi4004's speakers. If the Mi4004 is
already on, when you connect the external
unit to it, the Mi4004 will change to LINE IN
mode automatically. If you disconnect the
external unit from the LINE IN jack, the
Mi4004 will revert back to the AM/FM/iPod
mode.
connected to the LINE IN jack or the
®
8
®
/LINE IN button to
®
®