Adjusting The Volume - Mixcder TR008 Manual De Instrucciones

Note:
1. Turn off the wireless headphone or speaker to disconnect
with TR008, the red LED will flash slowly.
2. TR008 will pair with the last paired device automatically
when turning on.
3. TR008 will power off automatically when it comes to pairing
mode for 10 minutes.
Clear the paired list
Press the on/off switch twice, then the red LED will flash 5
seconds. The paired list will be cleared and not be paired
automatically when power on the TR008.
RESET
In TX or RX Mode, when the TR008 is out of work or can't power
on, you can use a needle to press "RESET" for 3 seconds, the
paired list won't be cleared.

ADJUSTING THE VOLUME

- Volume can be individually adjusted using the built-in volume of
each headphone or speaker paired with the TR008.
Safety& Care
Taking care of your device in accordance with the following
recommendations will ensure optimal performance and a long
lifespan.
- Battery performance will be severely decreased when stored
in extreme temperatures:below-10℃/14℉ or above45℃/113
℉including direct sunlight.
- Clean with a soft, slightly damp cloth. Do not use chemical
cleaners.
- There are no user replaceable/reparable parts in the transmitter.
Disassembling it will void your warranty.
- Do not expose the device to liquids. If the device comes in
contact with liquids, quickly wipe away. If submersed in water,
EN-9