How To Use The Machine; Preparing The Machine; Making Coffee - eunasa Barista control Manual De Instrucciones

•Place the machine on a flat, even, stable, heat-resistant surface, strong enough to bear its weight.
•Do not install or use the machine near curtains or other flammable material and do not place anything on top of it during use.
•Do not place the machine on top of, or close to, additional oven or other equipment that generates heat (for instance, radiators etc.)
•Make sure there is enough space around the machine for proper ventilation.

HOW TO USE THE MACHINE

• This machine is designed for making espresso coffee solely for household use. It must not be used for other purposes and must not be
altered or tampered with for any reason. Use for any other purpose is considered improper and therefore dangerous. The manufacturer cannot
be held responsible for any damages resulting from improper, erroneous or unreasonable use.
• Do not touch the hot parts (Coffee nozzle) after using the machine. Danger of burns.
• While brewing coffee beware of possible splashes of hot coffee.
• Do not open main lever while brewing coffee.
REGULATIONS
• The manufacturer states that the product referred to in this booklet was manufactured in compliance with the CE regulations.

PREPARING THE MACHINE

Water filling
• Remove the water tank cover (8 Figure 1) and pour cold water into the tank (maximum 1000ml), then close the water tank cover
• Connect the machine to the electricity by inserting the plug (10Figure 1) in the socket.
Staring up for the first time
The first time you use the machine, or if it has not been used for a long time, the following must be done:
•Remove the tank (9 Figure 4) from the machine, wash it well with cold water (maximum 1000ml) and put it back in the machine making sure it
is fitted in properly (Figure 5)
•Make sure the handle (1 Figure 3) is down, and then place a cup on the Drain tray cover (6 Figure 1)
•Press the power switch (11 Figure 3) switch on the power then power lamps flash green, wait until the lamps turn to long green (wait for the
water to reach temperature to make coffee)
• Press the small cup key (or big cup key) (3 or 4 Figure 3) one time, then water starts coming out from the nozzle, when coffee is finished, the
machine will stop itself.
For this operation is necessary to make sure the tank is filled.

MAKING COFFEE

•Touch the power switch (11Figure 3) switch on the power then power lamp flash green and wait for the water to reach temperature then the
coffee lamp light (green).
• Open the handle (1 Figure 6).
• Take a capsule ( Figure 6) into the capsule window (2 Figure 6)