Publicidad
Idiomas disponibles
Idiomas disponibles
WIRING
Use the push terminals to wire your subwoofer in series or parallel.
L7 subwoofers are available with dual 2Ω (ohm) or dual 4Ω voice coils. Both
coils must be connected to a source of amplifi cation. The dual 2Ω woofer
will generate a 1Ω load if the coils are wired in parallel or a 4Ω load in series.
The dual 4Ω woofer will provide a 2Ω load wired in parallel or 8Ω load wired
in series. The terminals with the white dots are for the fi rst voice coil. The
terminals with solid-red and solid-black markings are for the second voice coil.
Paralleled Wiring
Dual 2Ω Voice Coils = 1Ω Load
Dual 4Ω Voice Coils = 2Ω Load
amplifi er
+
amplifi er
-
Series Wiring
Dual 2Ω Voice Coils = 4Ω Load
Dual 4Ω Voice Coils = 8Ω Load
amplifi er
+
amplifi er
coil
1+
coil
1-
-
Pro Tip: With a KICKER IQ amplifi er, a pair of KICKER QS
speakers, and a few KICKER cables, you're looking at a full
system upgrade that will dominate! KICKER amplifi ers and
accessories make it easy to upgrade with your existing or
stock source unit. Ask your dealer about KICKER amplifi ers
and speaker upgrades to complete your system!
coil
2+
coil
2-
Publicidad
