How To Use; Control Panel Features; Option Buttons - Sears Kenmore ELITE 796.6141 Serie Manual De Usuario

WARNING:
manual, including the Important Safety Instructions, before operating this dryer.

CONTROL PANEL FEATURES

D
A
POWER (ON/OFF) BUTTON
Press to turn the dryer ON. Press again to turn the
dryer OFF. Pressing the POWER button during a cycle
will cancel that cycle and any settings will be lost.
B CYCLE BUTTONS
Press the CYCLE buttons repeatedly to scroll through
the cycle selections until the desired cycle is selected.
The standard presets for the selected cycle will be
shown in the display. On MANUAL DRY cycles, these
settings can be adjusted using the cycle setting
buttons anytime before starting the cycle.
C
START/PAUSE BUTTON
Press this button to START the selected cycle. If the
dryer is running, use this button to PAUSE the cycle
without losing the current settings.
NOTE: If the dryer has been stopped for more than
four minutes, the dryer will turn off automatically
and all settings will be lost.

OPTION BUTTONS

D
These buttons allow you to select cycle options.
Some of the option buttons have secondary
functions. The controls can be locked or unlocked by
pressing and holding the CONTROL LOCK button
for three seconds.
E
CYCLE MODIFIER BUTTONS
Use these buttons to adjust the settings for the
selected cycle. The settings light up above the
buttons to show the current selection. The default
temperature setting cannot be changed in AUTO
DRY cycles. AUTO DRY cycles are modifi ed using
the Dry Level button.
All manuals and user guides at all-guides.com

HOW TO USE

To reduce the risk of fi re, electric shock, or injury to persons, read this entire
H F
G
E
B
F TIME AND STATUS DISPLAY
The display shows the estimated time remaining for
auto cycles and actual time for timed cycles. The
status of the cycle is also displayed. The CHECK
VENT indicator will illuminate if there is a serious
restriction in the exhaust system.
MORE TIME/LESS TIME BUTTONS
G
Use these buttons with the TIMED DRY and other
MANUAL DRY cycles to adjust the drying time. Press
the MORE TIME button to increase the selected
manual cycle time by one minute; press LESS TIME
to decrease the cycle time by one minute.
CHECK VENT INDICATOR
H
(DUCT BLOCKAGE SENSING SYSTEM)
The CHECK VENT duct blockage sensing system
detects and alerts you to blockages in the ductwork
that reduce exhaust fl ow from the dryer. This light
does not indicate any problems with your dryer.
If this light blinks, it indicates that your home's
exhaust system has a serious restriction, which is not
covered by your dryer's warranty. There are services
available for cleaning/maintaining the external
venting. Sears provides this service via Sears Carpet,
Upholstery, and Duct Cleaning. Call 1-800-661-6594
to schedule duct cleaning service from Sears (if it is
available in your area).
NOTE: To protect your fabrics, not all settings are
allowed in all cycles.
20
A
C