CLEANING
All parts of this nebulizer (excluding air tubing) should be cleaned according to the below
instructions. A different cleaning regimen may be specified by your healthcare professional;
additional hygienic precautions may be required for use with high-risk patients.
The masks, mouthpieces, tubing and nebulizer are not dishwasher safe. The below instructions
are for manual cleaning.
Nebulizer and Components Cleaning:
1.
Ensure that the power cord is disconnected
from the power outlet.
2.
Disconnect the air tube, nebulizer and
mouthpiece. Do not wash or submerge tubing.
3.
Disassemble the nebulizer by twisting the top
and bottom and separating the pieces, Fig 1-2.
4.
RInse the nebulizer and mouthpiece in running
water. Clean the nebulizer with warm, soapy
water. Then rinse pieces again to remove all
residue.
5.
Allow nebulizer and all parts to dry completely; store in a clean plastic bag or container.
Compressor Body Cleaning:
1.
Ensure that the power cord is disconnected from the power outlet.
2.
Wipe the outside of the compressor body with a clean, damp cloth
CAUTION: Do not use any powdered cleaners or soap pads which may damage the unit.
WARNING: Do not submerge the compressor in water; do so will result in compressor damage
and void the warranty.
Nebulizers and tubing should be replaced as needed depending on the frequency of therapy
treatments or when damaged, cracked or holes appear in the tubing. To order replacement
parts, use the included order form, call Customer Care at 866-326-1313 or your local dealer.
12 • ENGLISH
Fig. 1
Fig. 2