Getting Started - Logitech AV Stand Manual De Instrucciones

When the operation of the remote control
becomes intermittent or the effective
distance is significantly decreased,
replace the original battery with a new type
CR2032 3V lithium battery as follows:
1. Unlock and slide out the battery
1
holder from the remote control case.
2
2. Replace the weak/dead battery with
a new one. Be sure the battery is
installed correctly. The remote will not
work if the battery is installed with
wrong polarity.
3. Insert the battery holder back into
the battery slot.
1
2

Getting started

Setup for music listening
1. Connect the iPad to the stand by
carefully fitting the iPad to the 30-pin
connector. To avoid damage, do not
force the connection.
Note: For iPad 2, please attach the two adaptor
clips before placing the iPad in the stand.
2. Use the bracket to rotate the iPad
to portrait or landscape view.
3. Use the arm to adjust the iPad to
your preferred viewing angle.
4. Turn on both the speaker power and
the iPad power. Select your favorite
music source. Using the iPad, select play
and adjust the volume.
Note: When using the auxiliary input
(3.5mm connection), you must press
the FUNCTION button to toggle between
auxiliary input and the iPad connector input.
Logitech® AV Stand
English 7