EGO BBA2100 Manual Del Usuario página 7

◾
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
◾
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
◾
Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
◾
Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 100 °C may cause explosion.
◾
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
OTHER SAFETY WARNINGS
Training
◾
Read the instructions carefully. Be familiar with the
controls and the proper use of the machine.
◾
Never allow people unfamiliar with these instructions
or children to use the machine. Local regulations can
restrict the age of the operator.
◾
Never work while people, especial children or pets are
nearby.
◾
Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
Preparation
◾
While working, always wear substantial footwear and
long trousers. Do not operate the equipment when
barefoot or wearing open sandals.
◾
Thoroughly inspect the area where the equipment is to
be used and remove all objects which can be thrown
up by machine.
◾
Before using, always visually inspect to see that the
tools are not worn out or damaged. Replace worn out
or damaged elements and bolts in sets to preserve
balance.
Operation
◾
Do not operate the engine in the confined space where
dangerous carbon monoxide fumes can collect.
◾
Work only in daylight or in good artificial light.
◾
Always be sure of your footing on slopes.
◾
Walk, never run with the machine.
◾
For wheeled rotary machines, work across the slopes,
never up and down.
◾
Exercise extreme caution when changing direction on
slopes.
◾
Do not work on excessively sleep slopes.
◾
Use extreme caution when reversing or pulling the
machine towards you.
◾
Do not change the engine governor settings or over
speed the engine.
◾
Start the engine carefully according to manufacturer
instructions and with feet well away from tool.
◾
Do not put your hands or feet near or under rotating
parts.
◾
Never pick up or carry a machine while the engine is
running.
OPERATION ON A SLOPE:
Slopes are a major factor related to slip-and-fall acci-
dents, which can result in severe injury. Always be sure of
your footing on slopes. Operation on slopes requires extra
caution. If you feel uneasy on a slope, do not use it.
◾
Watch for holes, ruts, rocks, hidden objects, or bumps
which can cause you to slip or trip. Tall grass can hide
obstacles.
SERVICE
◾
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
◾
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
WARNING:
Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SAVE THESE INSTRUCTIONS
BRISTLE BRUSH ATTACHMENT — BBA2100
EN
7