Publicidad
Idiomas disponibles
Idiomas disponibles
▶ It is recommended that rubber gloves and non-skid shoes are worn when working outdoors.
▶ Keep children clear. Keep everyone clear of your work zone.
▶ When working on walls or ceilings, make sure that the surrounding work area is secured. Falling objects
or tools could cause serious injury.
▶ Avoid unusual body positions. Maintain firm footing and balance at all times. This will give you better
control of the product in unexpected situations.
▶ Do not work off a ladder.
General safety measures
▶ Use product, accessories, insert tools, etc. in accordance with these instructions. Take the working
conditions and the work to be performed into account. Use of equipment for applications other than
those intended can result in hazardous situations.
▶ To reduce the risk of injury, use only genuine Hilti tools and accessories.
Requirements to be met by users
▶ Follow the instructions concerning care and maintenance.
▶ Never tamper with or modify the power tool in any way.
▶ The tool is intended for professional use. The tool may be operated, serviced and repaired only by
authorized, trained personnel. This personnel must be specially informed of any possible hazards.
▶ Do not operate the machine if your full attention is not on the job.
3
Description
3.1
Product overview
3.2
Intended use
The product described is an application-specific system for testing fasteners. It consists of a mechanical
screw jack passing through a hydraulic load cell which directly measures the load applied to the fastener
and shows this read-out on the pressure gage.
There is a range of HAT 28 kits. These kits have been specially assembled for testing most small and
medium-size fasteners.
3.3
Items supplied
Pull-out tester, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
*286175*
1
286175
Grip
@
Crank
;
Coupling
=
Pressure gauge
%
Tester housing
&
Load distribution bridge
(
Swiveling feet
)
Adapter X-IE
+
Slotted button adapter
§
Threaded button adapter
/
Scaffold ringbolt adapter
:
Button adapter
∙
Threaded-rod adapter
$
Threaded-rod legs
£
Loading claw foot
|
English
9
Publicidad
