Publicidad
* User-definable = SCROLL LOCK, CAPS, ESC, F12 or NUM
LOCK
Hotkey preceding sequence configuration: For users who want
to use a preceding sequence other than two consecutive Scroll
Locks, there are convenient ways to configure it:
1. Hit Scroll Lock + Scroll Lock + H, then the KVM switch will be
ready for new preceding sequence selection. Or Press and hold
down the last front-panel button (Button 2 or Button 4) for over 8
seconds, and then release the button.
2. Select and press the key you would like to use as your preceding
sequence (Scroll Lock, Caps, ESC, F12 or Num Lock keys are
available for selection). Now you can use the new preceding
sequence to execute your hotkey commands.
Each keystroke within a hotkey sequence should be pressed
within 2 seconds. Otherwise, the hotkey sequence will not be
validated.
Publicidad
