Practical Hints; Cleaning And Care - Team International TEAM GR 8 Manual De Instrucciones

Fax +32 2 359 95 50

PRACTICAL HINTS

• Frozen food should always be thawed before it is grilled.
• When grilling big quantities, it is recommended to occasionally carefully remove the
accumulated fat from the tray. Therefore:
Place the thermostat knob on the position 0 and remove the plug from the
-
power supply.
Remove the grill rack with the foodstuffs.
-
Remove the heating element and the control panel. Caution: the heating
-
element is very hot. Do not place it on an inflammable surface.
CAUTION: DO NOT GET BURNED AND HOLD THE CABLE IN ORDER THAT IT DOESN'T
COME INTO CONTACT WITH THE HEATING ELEMENT.
Remove the accumulated fat from the tray.
-
Replace everything. Therefore proceed inversely.
-

CLEANING AND CARE

• Before cleaning your appliance, always make sure that the plug has been removed from
the mains supply socket.
•
Allow the appliance to cool down thoroughly before cleaning, remove the grill rack and
tray, and empty the remaining water.
• Clean the bottom of the appliance, the tray and the grill rack with warm soapy water and
rinse and dry afterwards.
CAUTION: DO NOT WET THE RESISTANCE OR THE CONTROL PANEL.
•
Wipe the outer surfaces of the grill with a damp cloth and dry afterwards.
PROTECTION OF THE ENVIRONMENT– DIRECTIVE 2002/96/EC
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it to a municipal collection point performing
waste recovery by means of reuse, recycling or use for other applications in accordance with
the directive.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
9
Assembly page 9/28
on the
TEAM GR 8 - 070817