Sanyo FX-02 Manual De Instrucciones página 4

n
FX-02: INSTALLATION
1.
bracket into DIN-standard cutout 182 x 53 mm in the dashboard
Insert mounting
or a console.
The side marked "UP" should be up.
2. Bend the stoppers of the mounting bracket with a screwdriver, and secure the
bracket firmly to the dashboard.
3. Fix the mounting bracket by using the mounting hardware supplied.
4. Insert the set into the mounting bracket until it locks.
SET REMOVAL
1. Push the upper edge on left sides of the handle to raise the handle.
2. Pull the handle to remove the set.
Stopper