Safety Instructions - NEO PROTON 6 QUAD USB Manual De Usuario

2. SAFETY INSTRUCTIONS

1.
The products referred to in this manual conform
to the European Community Directives and are
there- fore marked with .
2. The unit is supplied with hazardous network
voltage (230V~). Leave servicing to skilled per-
sonnel only. Never make any modifications on
the unit not described in this instruction manual,
otherwise you will risk an electric shock.
3. Connection must be made to a power supply sys-
tem fitted with efficient earthing (class I appliance
according to standard EN 60598-1). It is, moreo-
ver, recommended to protect the supply lines of
the units from indirect contact and/or shorting to
earth by using appropriately sized residual current devices.
4. The connection to the main network of electric
distribution must be carried out by a qualified
electrical installer. Check that the main frequency
and voltage correspond to those for which the
unit is designed as given on the electrical data label.
5.
This unit is not for home use, only professional applications.
6.
Never use the fixture under the following conditions:
- in places subject to vibrations or bumps;
- in places with a temperature of over 45 °C.
7. Make certain that no inflammable liquids, water or
metal objects enter the fixture.
8. Do not dismantle or modify the fixture.
9. All work must always be carried out by a qualified
technical personnel. Contact the nearest sales
point for an inspection or contact the manufacturer directly.
10. If the unit is to be put out of operation definitvely,
take it to a local recycling plant for a disposal which
is not harmful to the environment.
WARNING AND INSTALLATION PRECAUTIONS
•
If this device will be operated in any way different
to the one described in this manual, it may suffer
damage and the guarantee becomes void. Further
more, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
•
Before starting any maintenance work or cleaning
the projector, cut off power from the main supply.
•
For inside use only. Not designed for outside use.
•
The minimum distance between the fixture and
surrounding walls must be more than 50cm and
the air vents at the housing must not be covered in any case.
•
Install the fixture in a well ventilated place.
•
Keep any inflammable material at a safe distance
from the fixture.
•
The maximum temperature that can be reached
on the external surface of the fitting, in a thermally
steady state, is high. After power off, please cool
down over 15 minutes.
•
Shields, lenses or ultraviolet screens shall be
changed if they have become damaged to such an
extent that their effectiveness is impaired.
•
The lamp(LED) shall be changed if it has become
damaged or thermally deformed.
•
Never look directly at the light beam. Please note
that fast changes in lighting, e.g. flashing light, may
trigger epileptic seizures in photosensitive per-
sons or persons with epilepsy.
P. 3
PROTON 6 QUAD USB
ENGLISH VERSION