Manuales relacionados para Watchguard AP325
Resumen de contenidos para Watchguard AP325
- Página 1 WatchGuard ® AP325 HW Model: C-110 Quick Start Guide watchguard.com/start WatchGuard® Technologies, Inc.
- Página 2 1. Go to www.watchguard.com/activate 2. Log in to your WatchGuard account, or create a new account*. *If you create a new account, return to www.watchguard.com/activate after you finish the account creation process. 3. Type the serial number for your device.
- Página 3 • After you power on the AP, wait a few minutes until the Power indicator and the Ethernet (LAN1) indi- • Type the AP Passphrase the Firebox will use for APs after they are paired. cator turn solid green. This shows the AP is online and can communicate with the WatchGuard Wi-Fi Discover and pair the AP Cloud.
- Página 4 SSID 更高版本。 您的新无线网络是否 选择一种安全模式。我们建议使用 。 WPA2 PSK 正在广播。 点击保存以使用新配置重置 设备。 开启您的新无线网络。 验证 AP 设备状态 从 WatchGuard Wi-Fi Cloud 仪表板中，启动“Discover”。 • 选择 Monitor > WiFi > Access Points。 • 确保您的 AP 显示，并且状态为活动。 • WatchGuard Wi-Fi 云帮助 有关如何使用 云配置 设备的完整信息，请参阅 ， WatchGuard Wi-Fi 网址为...
- Página 5 DHCP 2. Connectez-vous à votre compte WatchGuard ou créez un nouveau compte*. 有关静态 IP 地址的更多信息，请参见 Fireware 帮助。 * Si vous créez un nouveau compte, retournez sur la page www.watchguard.com/activate à la fin du processus de création de compte. 如果网络不支持以太网供电 ， 请连接到可选电源适配器或...
- Página 6 WatchGuard Wi-Fi Cloud sur ces ports : HTTP TCP 80/443 et UDP 3851. • Connectez-vous à l'interface utilisateur Web Fireware et assurez-vous que le protocole DHCP est Si vous disposez d'une appliance Firebox, la politique WatchGuard Wi-Fi Cloud ouvre les ports nécessaires. activé sur l'interface à laquelle le périphérique AP se connecte.
- Página 7 3851. AUSWÄHLEN DER AP-VERWALTUNGSMETHODE Wenn Sie eine Firebox haben, werden die entsprechenden Ports durch die WatchGuard Wi-Fi Cloud-Richtlinie geöffnet. Beim Kauf Ihres AP-Geräts haben Sie sich für eine entsprechende Verwaltungsmethode • Wenn Ihr Netzwerk PoE+ (Power over Ethernet) nicht unterstützt, verbinden Sie das AP-Gerät mit entschieden.
- Página 8 2. Accedere al proprio account WatchGuard, oppure crearne uno nuovo*. aktiviertem DHCP. * Se si crea un nuovo account, tornare a www.watchguard.com/activate dopo aver terminato la Weitere Informationen zur Verwendung einer statischen IP-Adresse finden Sie in der Fireware-Hilfe. procedura di creazione dell’account.
- Página 9 WatchGuard Wi-Fi Cloud sulle porte seguenti: HTTP TCP 80/443 e UDP 3851. • Accedere all’interfaccia utente web Fireware e verificare che sull’interfaccia alla quale si collega Se si dispone di un dispositivo Firebox, la policy WatchGuard Wi-Fi Cloud apre le porte necessarie. il dispositivo AP sia abilitato il protocollo DHCP.
- Página 10 セキュリティ モードを選びます。 が推奨モードです。 WPA2 PSK 新しい設定で デバイスをリセットするには、 をクリックします。 Save 新しいワイヤレス ネットワークに切り換えます。 AP デバイスの状態を確認 WatchGuard Wi-Fi Cloud ダッシュボードから、 [Discover] を開始します。 • [Monitor > WiFi > Access Points] を選択します。 • • アクセスポイントが表示され、状態がアクティブになっていることを確認します。 初期構成の後、AP デバイスがアクティブになるまで数分かかることがあります。 URL の WatchGuard Wi-Fi を使った デバイス設定の詳細については、下記 WatchGuard Wi-Fi Cloud Cloud Help を参照してください。...
- Página 11 が有効になっているオプション インター フェイスに 2. WatchGuard 계정으로 로그인하거나 새 계정을 만듭니다*. • AP Firebox DHCP 接続します。 * 새 계정을 만들 경우 계정 생성 과정을 마친 후 www.watchguard.com/activate 로 固定 IP アドレスに関しては Fireware ヘルプ をご参照ください。 돌아가십시오. 3. 장치의 일련 번호를 입력합니다. お使いのネットワークが （...
- Página 12 • AP 장치의 전원을 켠 후 전원 표시등과 이더넷(LAN1) 표시등이 녹색으로 켜질 때까지 몇분 동안 Wireless Controller 확인란을 선택합니다. 기다립니다. 이 상태는 AP 장치가 온라인이고 WatchGuard Wi-Fi Cloud와 통신할 수 있음을 • AP 장치가 페어링된 후 Firebox가 AP 장치에 대해 사용할 AP Passphrase를 입력합니다.
-
Página 13: Active Su Dispositivo Ap
Ethernet (LAN1) se iluminen en color verde. Esto indica que el dispositivo AP está en línea y se puede comunicar con la nube Wifi de WatchGuard. Conéctese a la Nube Wifi de WatchGuard Para conectarse a la Nube Wifi de WatchGuard, inicie sesión en el Centro de soporte de WatchGuard Total & Secure Wi-Fi Basic Wi-Fi o ingrese a https://login.watchguard.cloudwifi.com... -
Página 14: Ativar O Dispositivo De Ap
2. Faça login na conta WatchGuard ou crie uma nova*. Fireware). * Se for criar uma conta nova, acesse www.watchguard.com/activate depois de concluído o • Si su red no es compatible con Alimentación a través de Ethernet (PoE+), conecte el inyector PoE+ processo de criação de conta. - Página 15 - Lembre-se de conferir a conectividade do dispositivo AP com a internet e se ele consegue • Faça o login na interface de usuário da web do Fireware e confira se a interface do dispositivo AP se comunicar com os serviços do WatchGuard Wi-Fi Cloud nestas portas: HTTP TCP 80/443 e tem DHCP ativado.
- Página 16 WPA2 PSK 按一下 (儲存) 以使用新設定重設您的 裝置。 [Save] 切換到您的新無線網路。 驗證 AP 裝置狀態 • 從 WatchGuard Wi-Fi Cloud 儀錶板， 啟動 Discover。 • 請選擇 Monitor > WiFi > Access Points。 • 請確認您的 AP 已經出現， 且處於作用中狀態。 在初始配置后， AP 设备可能需要几分 钟才会显示为活动。 如需有關如何在 設定 裝置的完整資訊，請參閱 說明，...
- Página 17 • 驗證 裝置狀態 選取 (儀表板) (閘道無線控制器)，然後選取 • [Dashboard] > [Gateway Wireless Controller] (無線基地台) 索引標籤。 Access Points 請確認您的已知 AP 裝置受信任， 且裝置狀態為 「Online」 (上線） 。 • 如需有關如何搭配 上的 (閘道無線控制器) 設定 裝置的完整資訊， Firebox Gateway Wireless Controller 請參閱 Fireware Help (韌體說明) ，網址是 。 watchguard.com/help...
-
Página 18: Safety Warning
Sicherheitshinweise. • When removing or installing an appliance, follow the general installation safety instructions. Disclaimer WatchGuard shall not be held liable if the end user alters, modifies, or repairs any WatchGuard hardware appliance. -
Página 19: Advertencia De Seguridad
AVISO DE SEGURIDAD FCC CERTIFICATION Todos los productos WatchGuard están diseñados y probados para satisfacer estrictos requisitos de This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) seguridad. Estos requisitos incluyen la homologación de productos de seguridad y otras normas de This device may not cause harmful interference, and (2) this device must accept any interference received, cumplimiento global. -
Página 20: Industry Canada Certification
CE Notice operation as appropriate; and The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the (iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated. - Página 21 Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz, 5470-5600 MHz Brasil ANATEL and 5650-5725 MHz. Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350 MHz, 5470-5600 MHz et 5650-5725 MHz.
-
Página 22: Weee Statement
EU country legislative requirements is seamless for our product’s end users. If you have a Draft EN 301 489-17 V3.2.0 (2017-03) WatchGuard product that is at its end of life and needs to be disposed of, please contact WatchGuard Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Customer Care Department at: standard for radio equipment;... - Página 23 • WatchGuard does not import more than 1 metric ton per year of a substance as defined by REACH. • WatchGuard products are non-chemical products that are not designed to release any substance under normal and reasonably predictable application.
- Página 24 Declaration of Conformity 商品標籤及商品檢驗標識： (Picture) Product Label and Commodity Inspection Mark. WatchGuard Technologies Inc. hereby declares that the product(s) listed below conform to the European Union directives and standards identified in this declaration. Product (s): 設備名稱：無線接入器 ，型號（型式）：AP325 Wireless Access Point, WatchGuard Model AP325...
-
Página 25: International Sales
© 2020 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Fireware, and LiveSecurity are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or other countries. All other trademarks and tradenames are the property of their respective owners.