Project Source 13924-003 Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
1. Identify ground side on track head assembly (A) and
track section (not included). Insert track head assembly
(A) connector into track section, twisting ground side of
connector toward ground side of track until connector
snaps into place. See Fig. 1.
Note: The ground side of track head assembly (A)
connector is the side with the two metal tabs. The
ground side of the track section has an indented
groove on the face and two internal copper bars. The
track head assembly (A) can only be assembled if the
ground sides are aligned.
2. Install bulb (not included). Refer to the relamping
label for recommended maximum wattage. See Fig. 2.
3. To remove track head assembly (A) from track, first
allow track head assembly (A) to cool down; grasp
track head assembly (A) connector and pull down
while twisting until track head assembly (A)
disengages. See Fig. 3.
1
GROUND
SIDE GROOVE
INDENTATION
A
2
A
3
A
4
GROUND TAB
Lowes.com