Denso First Time Fit Cabin Instrucciones De Instalación página 2

Cabin Air Filter Removal
The information below explains necessary procedures and tools to remove and install the Cabin Air
Filter.
1. Verify a filter was installed by the factory.
NOTE: A filter data label specifies a filter
was installed.
2. Open the glove box. Remove the screw on
the right side of the glove box and slide the
damper link aside.
3. Press both sides of the glove box inward to
allow it to open past the stops. Swing the
glove box completely open.
2
Fig. 1
Fig. 2
Fig. 3