Set The Date; Set The Auto-Update Of Date And Time - Nokia 6265 Manual Del Usuario

S e t t i n g s

Set the date

In the standby mode, select
date, enter the date, and select OK.
Change the format
1. In the standby mode, select
Date format and the format of your choice.
2. With Date on the display, select

Set the auto-update of date and time

Auto-update is a network service. See "Network services," p. 5 for more information.
If your wireless service provider supports this feature, you can allow the digital
network to set the clock, which is useful when you are out of your home area
(for example, when you have traveled to another network or time zone).
In the standby mode, select
of date/time > On, Confirm
If you use the Auto-update of date/time
you may be prompted to enter the time manually. Network time will replace the
time and date when you reenter your digital network.
If your battery has been removed or has discharged outside the digital network,
you may be prompted to enter the time manually (once the battery is replaced or
recharged, and you are still outside of the digital network).
■ Call
Location info sharing
Location info sharing
case of an emergency call.
In the standby mode, select
Emergency or On.
GPS should not be used for precise location measurement, and you should never
rely solely on location data from the GPS receiver.
This feature is not designed to support positioning requests for related calls.
Contact your service provider for more information about how your phone complies
with government regulations on location based emergency calling services.
68
Menu > Settings
Menu > Settings
Date separator, and the separator of your choice.
Menu > Settings
first, or Off.
option while outside your digital network,
sets whether your GPS signal is always on or only in the
Menu > Settings
> Time and date > Date
> Time and date
> Time and date > Auto-update
> Call > Location info sharing
> Set the
> Date >
>