Cleaning And Maintenance - cecotec BIGDRY 3000 PURELIGHT Manual Del Usuario

ENGLISH
3. Low-temperature dehumidifier
The ideal temperature for the device to work is from 5 ºC to 50 ºC.
Purification button
Press the power/purification button, the purification indicator light will turn green and the
appliance will begin to work in air purification mode.
Press the power/purification button again and the LED light will turn off but the function will
still operate.
Touch the button for a third time and the device will turn off.
Fig. 9
Dehumidification button
Press the dehumidification button when the machine is turned on, the LED operating indicator
light will turn green and the device will start dehumidificating.
Press this button again and the LED light will turn off but the function will still operate.
Touch the button for a third time and the dehumidification function will turn off.
Fig. 10
Mode button
Press the mode button to set the intensity of purification once it's activated.
This button will set the device in one of these three modes: High-Medium-Low intensity.
Fig. 11

5. CLEANING AND MAINTENANCE

Make sure the unit is powered off and that the power cable is disconnected from the power
source.
Use a soft cloth to clean away any dust or debris from the surface of the unit or the air inlets.
Pull out the water tank and slide out the cover to clean the water tank.
Do not clean the filter with a vacuum cleaner or wash it directly, just put the filter under the
sun to sterilize it regularly.
If it is not going to be used in a long time, make sure the water tank is empty and the machine
is completely dry. Cover it and place it in a cool and well-ventilated place.
Do not damage or remove the water tank float as this can affect the operation of the appliance,
cause water leaks and malfunction.
Note: Do not drop any water inside the machine when cleaning the air outlet.
BIGDRY 3000 PURELIGHT / PURELIGHT BLACK 23