PROZIS HABITAT Manual Del Usuario página 7

INSTRUCTIONS
Installation
1
4
1. Take the contents out of the box. Pull up the light panel rod with one hand while holding
the water tank in place with the other.
2. Remove the water tank cover and take out the accessories: power adapter, seed pot kit,
and two plant food bottles.
3. Before planting, pull out the light panel by the rod. Wash and dry the water tank.
4. With the top cover off, reinstall the light panel with one hand while holding the water tank
in place with the other.
5. Assemble the power pack at the bottom of the tank. When all is ready for planting, con-
nect the adapter to the power supply. When properly connected, a 'beep' sound is played
as confirmation.
Planting
• Preparing the plant food solution
1
1. Fill both plant food bottle A and B with purified water and shake well so the contents mix
properly.
2. Using the markings on the inside of the bottlecap to measure, add 5 mL of each solution
per 1 liter of water, and stir well to obtain a uniform mixture. To fill the whole tank, you will
need about 4 L of water/plant food solution mixture.
2
5
2
3
EN
7