Technical Specifications - SENSEA OPALE 22 S 60 2P Instrucciones De Montaje

2. Electrical safety instructions
FR
ES
force in the country where the installation takes place.
ENVIRONMENT
PT
IT
EL

TECHNICAL SPECIFICATIONS

PL
Tension nominale
Fréquence nominale
RO
Puissance nominale
EN
Lampe
Classe de protection
Indice de protection
MAINTAINANCE / CLEANING
• The lamps used must always comply with the characteristics stated in this manual.
• Do not replace the lamps.
MISCELLANEOUS AFTERSALES SERVICE, REPAIRS, GUARANTEE, ETC.
these instructions can be particularly dangerous to users.
If necessary, contact the after-sales service of the store where you purchased this product.
Information for the external connection box:
• Connect the electricity supply to the terminal block, respecting the following connection colour code:
- Connect the Brown Wire (Live) to the corresponding terminal marked L on the terminal block.
- Connect the blue wire (Neutral) to the corresponding terminal marked N on the terminal block.
- C onnect the Green/Yellow wire (Earth) to the Earth terminal marked E or
• Attach the mirror to the wall.
• Turn the electricity supply back on and switch on the luminaire. Your luminaire is now ready to be used.
WARNING!
This product bears a symbol relating to the disposal of waste of electrical and electronic products. This means that this product must not
be disposed of with household waste, but must be deposited in a recovery system in accordance with EU Directive 2012/19/EU. It means
that this product must be recycled or dismantled in order to reduce its impact on the environment. The electrical equipment contains
hazardous substances which may pose a risk to the environment and human health.
220-240 V~
50 Hz
OPALE 22 S 60 2P 9W MAX
OPALE 22 S 80 3P 13W MAX
OPALE 22 S 100 3P 16.5W MAX
OPALE 22 S 120 3P 19.6W MAX
LED 5700 °K - CRI 80
Classe II
IP 44
F
WARNING:
!
Level of protection (foreign objects) - 1st digit
foreign solid objects inside the electrical parts or the casing of the appliance.
Level of protection (liquids) - 2nd digit
The second digit corresponds to the level of protection of live parts against the ingress of
various forms of humidity (for example condensation, vaporisation, immersion, etc.).
IP Rating 1st digit
4
Protected against solid objects
greater than 1 mm
IP Rating 1st digit
4
Protected against splashing water
from all directions.