Publicidad
Idiomas disponibles
Idiomas disponibles
ProDock (WIP040) - user Manual
Thank you for purchasing the Logic3 ProDock. As with all Logic3 Products it has been built to the highest manufacturing
standards and tested throughout its development, to ensure you get the best possible Product. Please read through and
familiarize yourself with this manual before you use the ProDock.
set up of ProDock
1.
Select and fit the correct plug adapter to suit your power supply.
Plug in the DC jack to the rear of the Dock unit (DC in) and plug the power supply into your mains socket.
Turn the mains socket ON (Logic3 logo will illuminate dimly).
The mini USB cable (not supplied) can also be connected to Sync your iPhone/iPod to your PC.
NOTE: Your iPhone/Pod will only charge when the AC Adapter is connected
2.
Connect your Dock to your preferred device : - TV (Composite Video out)
3.
Insert the appropriate cradle (supplied with your iPhone/iPod) into the ProDock base.
NOTE for iPhone 3G the cradle is supplied with the ProDock
4.
Dock your iPhone/iPod onto the docking base of the ProDock (Logic3 logo will illuminate brightly)
5.
Insert the battery into the remote control.
WARNING: Please ensure that the battery is inserted correctly. If the battery is inserted incorrectly (reversed
polarity), it may cause personal injury as well as damage to your remote control.
using the ProDock
1.
Power is turned ON/OFF via the Power Button located on the Remote Control (Logic3 logo will illuminate).
2.
The ProDock volume is preset to a 30% volume level; the volume can be adjusted by using the Volume Up/Down keys
located on the remote control.
3.
Simple functions of the iPhone/iPod can be controlled by the remote control :
Vol Up
Vol Down
Play/Pause
RW/Previous
FF/Next
Scroll Up
Scroll Down
Menu
Select
Standby
Mute
Power lED Indicator
LED Dim - Dock in Standby mode /iPhone/iPod Off
LED ON - Dock ON / iPhone/iPod Off
LED Off - No Power Adaptor attached, iPhone/iPod not connected
Specification
Distortion <=0.1% at the Max output
S/N ratio:>80 dB@1W
Frequency Response: 80Hz – 16k Hz
Provided Power Adaptor: 5VDC @ 650mA
- RGB (Component Video out)
- Increases the Volume level.
- Decreases the Volume level.
- Plays the track/video, Press whilst in Play mode to Pause the track/video
- Skip Backwards through tracks/video, hold to scan Backwards through a track/video
- Skip Forwards through tracks/videos, hold to scan Forwards through a track/video
- Scrolls Up the Cursor in iPhone/iPod Navigation Menu
- Scrolls Down the Cursor in iPhone/iPod Navigation Menu
- Press to jump Back one upper level in iPhone/iPod Navigation Menu
- Press to Enter into next level in iPhone/iPod Navigation Menu
- Press to turn OFF the iPhone/iPod, press whilst in OFF mode to turn ON the iPhone/iPod
- Press to Mute the Volume, Press whilst in Mute mode to Un-Mute the Volume
4
Publicidad
