Tabla de contenido
Publicidad
Table 1.
Item
Installing the ThinkCentre Ultra Small Under Desk Mount
This section provides the instructions for the ThinkCentre Ultra Small Under Desk Mount.
1. Locate the area where the Desk Mount will be installed, allow room for cables. Mark screw holes on
the mounting surface of the desk.
2. To prevent the mounting surface from cracking, you may need to pre-drill holes.
3. Place the Desk Mount in position line up with the screw holes.
4. Using appropriate screws, secure the Desk Mount to the desk.
Note: A wood spacer may be needed (only if you are installing the ThinkCentre Ultra Small Under
Desk Mount on a desk with a large edge.) A wood spacer is NOT INCLUDED.
5. Completely adjust screws until the head of the screws are no longer protruding.
6. After mount is secure, place system in the Desk Mount as pictured below.
7. Insert the two plastic screws provided into the holes on each side of the bracket to secure the system
in place. This prevents the system from sliding.
Product Registration
Thank you for purchasing this Lenovo
provide us with information that will help Lenovo to better serve you in the future. Your feedback is
valuable to us in developing products and services that are important to you, as well as in developing
better ways to communicate with you. Register your option on the Lenovo Web site at
www.lenovo.com/register
Lenovo will send you information and updates on your registered product unless you indicate on the
Web site questionnaire that you do not want to receive further information.
2
Description
10 in. Mounting bracket
(2) 1/2 in. Plastic screws
#8 x 3/4 in. Wood screws
(4)
#
™
product. Please take a few moments to register your product and
Publicidad
Tabla de contenido
