Specifications - HEIDENHAIN IK 5000 QUADRA-CHEK Instrucciones De Instalación

IK 5000 QUADRA-CHEK
Installation Instructions
Operating Instructions available at www.heidenhain.de

3. Specifications

The IK 5000 QUADRA-CHEK is a family of Windows
precision dimensional measurements of 2D and 3D parts on comparators, coordinate
measuring systems and measuring microscopes. Systems are available in versions for 3
or 4 axes and support manual part positioning and measurement under user control, or
CNC part positioning and automated measurement under program control. This product
is designed for indoor use only. The IK 5000 QUADRA-CHEK components shall only
be installed as described in these instructions. Installation and maintenance are to be
performed by qualified personnel only.
Specifications
Power input
PCI connector to PC G :
IK 5000 card power connector E :
Input frequency XYZ A , Q H :
» 1 V differential:
PP
« TTL differential:
« TTL single-ended:
Power consumption
IK 5000 card
XYZ A , Q H :
XYZ B :
Q J :
Zoom N :
Light K :
Specification:
Connector:
PCI component:
Identifier in component PCI 9030
Vendor ID:
Device ID:
Environmental conditions
Operating temperature:
Storage temperature:
Relative humidity:
ID 678414-xx
ID 678415-xx
Mass: 122 g
®
PC based products for conducting
DC 5 V (± 5 %), DC 12 V (± 5 %), DC -12 V (± 5 %)
DC 5 V (± 5 %), DC 12 V (± 5 %)
max. 2.0 MHz
max. 3.5 MHz
max. 3.0 MHz
+12 V: 3600 mW
-12 V: 1200 mW
+5 V: 6250 mW
+3.3 V: 1650 mW
total: 12700 mW
max. 375 mW
max. 650 mW
max. 500 mW
rated 600 mW
rated 800 mW
PCI local bus Spec. Rev. 2.2
PCI V / 32-bit connecting element
PCI 9030 from PLX, target interface (slave)
0x10B5
0x2065
0 °C ... 55 °C
-30 °C ... 70 °C
† 80 %
ID 678417-xx
ID 678418-xx
ID 678416-xx ID 678420-xx
ID 678419-xx ID 678421-xx ID 678422-xx
184 g 150 g 190 g
17