melitta LOOK THERM Timer Instruciones De Uso página 7

buttons  for longer than two seconds
to ensure they work perfectly. Therefore there may
be for example water deposits remaining. Rinse the
appliance twice with the maximum amount of water
and without a filter bag or ground co ee, in order to
clean it.
the appliance is equipped with various features.
These features are explained below.
3. Set water hardness
Depending on water hardness lime scale may build up
in the appliance. This increases the appliance's energy
consumption as lime scale on the heating element can
prevent the water heating e ectively. To avoid damage
the appliance must be descaled regularly. The descaling
display helps you in this. If the CALC-button  is
permanently lit this shows that the appliance needs to
be descaled.
The appliance is pre-set for a high level of water
hardness (level 4). You can find out the level of water
hardness in your area by asking your local water
provider or by using water hardness measuring strips
available in the shops. For softer water the descaling
display can be adjusted to descale less often.
pressing the m-button  set the desired level of
water hardness. The hardness setting will then
show in the display
hardness, let go of the CALC-button.
Your settings are now saved.
Hardness
I
setting
<7°
°dH
dH
1
Display 
Please note:
after removing the power cable.
4. Making coffee
the power source.
using the therm jug. With the help of the water level
display on the tank  you can choose the correct
number of cups.
Small cup symbol = approx. 85ml co ee per cup,
large cup symbol = approx. 125 ml co ee per cup.
jug with closed lid in the appliance.
 to the left.
filter bag 1x4
®
 and by briefly
II III IV
14-21°
7-14° >21°
dH dH dH
2 3 4

at the embossed seam
®
and place it in the filter holder.  Press the filter bag
into the filter holder by hand, to ensure a good fit.
depends on your personal taste. We recommend
using 6g of ground co ee per large cup.
An audible click tells you it is inserted properly.
AromaSelector
®
the taste of your co ee with just one hand: From
mild-aromatic ( )to strong intensive (
. Brewing begins.
15 minutes after being switched on. This avoids un-
necessary use of electricity and saves energy. You can
of course turn the machine o manually at any time.
when you remove the pot from the appliance. 
dispose of the filter bag simply and easily.
5. Using the insulated pot
the insulated lid of the pot.
side while lifting the lid up .
6. Timer Feature
The appliance is equipped with a TIMER feature. This
starts the brewing process at a time you programme.
co ee', but without pressing the START button.
button . The first time you programme it the
display will show 00:00.
the h and m buttons . This goes faster if you hold
down the button.
time will show. The chosen start time is saved until
you set a di erent time or remove the appliance
from the power source.
feature is activated for the next brewing process.
To show this the TIMER button  is illuminated
and the programmed start time shows briefly in the
display .
the time you have set.
socket or set a new start time, the previous start
time is saved.
deactivate the timer feature at any time. The light in
the TIMER button  goes o .
have programmed, press the START button . The
TIMER feature will be deactivated.
7. Cleaning and maintenance
External cleaning
swivel filter  can be washed in the dishwasher.
GB
 you can set
®
).
.
 the timer
 you can
9