Telephoning; Accepting A Call; Set Speaker/Loudspeaker Volume; Switch Handset Off - Swissvoice Aeris 146 Instrucciones

Aeris 146

Telephoning

• Dial the desired number using the keypad.
• Press the Talk key.
End the call
• Press the End call key.

Accepting a call

• Incoming calls are signalled by a ring tone on the handset.
• Press the Talk key and conduct your conversation.
End the call
• Press the End call key.
Please note that when handsfree speaking is activated, call partners should
speak alternately and avoid speaking simultaneously. This telephone sup-
presses the first call signal in order to evaluate the incoming number signal
and verify whether the number is stored in the phonebook. Calls cannot be
made if the battery is almost discharged or the handset is out of range of the
base station.

Set speaker/loudspeaker volume

You can adjust the speaker/loudspeaker volume during a conversation (5 levels avail-
able).
Select the desired volume using the Navigation keys.

Switch handset off

• Press and hold the End call key (approx. 3 sec).
• Press and hold the End call key to reactivate the handset.
22 Aeris 146