How To Use - Inateck BR1008 Manual De Instrucciones

Bluetooth Transmitter Mode (TX)
The transmitter mode enables the BR1008 to transmit audio signal from
non-Bluetooth devices like TV or computer to Bluetooth headphones or
speakers. When BR1008 is in TX mode, you can connect BR1008 with a
non-Bluetooth audio device like a TV / computer via an AUX audio cable.
Then connect the BR1008 with Bluetooth headset / speakers etc. via
Bluetooth.
Turn on/off aptX Low latency Function
Press and hold MFB button for 7 seconds when the device is off to turn
on/off aptX Low latency; With aptX Low latency on, the adapter powers
off after the green indicator flashes one second; With aptX Low latency
off, the adapter powers off after the green indicator flashes twice.
Settings remain unchanged after reboot.

How to Use

1. Pairing
1) Set your Bluetooth enabled devices like Bluetooth headphones or
speakers to pairing mode.
2) Set the BR1008 to TX mode. Turn on the BR1008 by pressing and
holding the Multifunction Button for 3 seconds. Rapidly tap the
Multifunction Button twice to enter pairing mode with the LED
indicator flashes blue and red alternately.
4