Publicidad
RT600 Alarm temperature engine SEYMO
With the temperature control SEYMO © will know in real time the
degrees centigrade to which your engine is working. In addition, you
can set a maximum temperature value, from which the device will emit
an audible and visual alarm. Thanks to the Temperature control
SEYMO © will ensure that your engine is operating in optimum
conditions and will avoid prolonging any possible overheating.
Place the programmed digital display of the SEYMO © Temperature
control in a visible place near the control station. Remove the back cover
of the digital display and connect the 12V power supply with a 1 amp fuse,
and the probe. The probe cable must be installed in the engine block as
close to the cylinder head as possible. It has a perforated termination to
facilitate fixing to your engine using screws
Take special care when guiding the rest of the cable to avoid contact
with other hot areas of the motor.
important not to pull the terminal (hole) to pass the cable could
damage the probe
Configuration
Configuration button. Press for 2 seconds to change the maximum
temperature at which the 1st motor alarm will be activated. When it
is at the desired value, press once to confirm or wait 3 seconds, in
both cases the alarm value will be saved.
Configuration button. Press for 2 seconds to change the maximum
temperature at which the 2nd motor alarm will be activated. When it
is at the desired value, press once to confirm or wait 3 seconds, in
both cases the alarm value will be saved
Adjustment knobs. In the setup mode (when you press Set),
select Up / Down to change the warning temperature value to 99
C◦. The alarm will activate when the probe detects a
temperature at least 1C◦ higher.
GARANTÍA
Nuestros productos están garantizados contra cualquier defecto de fabricación o fallo de materiales por un periodo
de 2 AÑOS desde la fecha de su adquisición.
En caso de observar algún defecto o avería en la utilización normal del producto durante el periodo de garantía
Contactar con el proveedor.
no podrá ser aplicada en caso de uso indebido, conexionado o manipulación erróneos por parte del comprador.
El alcance de esta garantía se limita a la reparación del aparato declinando el fabricante cualquier otra
responsabilidad que pudiera reclamársele por incidencias o daños producidos a causa del mal funcionamiento del
producto.
.
.
Publicidad
