Precor Queenax Manual De Instrucciones página 7

Clean and inspect frames
To remove grease and dirt, clean frames daily with a diluted solution of one part 91% isopropyl alcohol to one part water on a dampened, lint-
free cloth. Wipe the System down with the damp cloth and light pressure, and dry completely. Be sure to wipe down both painted parts and
chrome- or plated-parts.
To restore and maintain the luster of chrome parts, use a commercial chrome cleaner.
As you clean, inspect the frames for cracks, rust, or other damage. Make sure welds are solid and fasteners are properly secured.
Check warning and instruction labels
The System includes a standard warning label.
Inspect the warning and any instructional labels daily to make sure that all the information can be clearly read. If any portion is not visible or
part of the label is not adhered properly, replace that label immediately (refer to Obtaining Service for purchase information).
Clean labels as needed with a diluted solution of one part 91% isopropyl alcohol to one part water on a dampened, lint-free cloth, and dry
thoroughly with a soft cloth.
Obtaining Service on the Queenax System
During the warranty period, the Queenax dealer is responsible for handling warranty-related issues. If you purchased the System directly from
Queenax, all warranty and service will be handled by either your local Precor Service Team at www.precor.com/service or your local dealer.
After the warranty period, contact a Queenax dealer. If you don't have a dealer or you're unsure, contact your local Precor Service Team at
www.precor.com/service.
|
Queenax™ Maintenance P/N Q39217-101 rev A, ENU
|
©2015 Precor Incorporated November 2015
7