Included In The Box - Luda Elektronik 50700149 Manual De Instrucciones

included in the Box

1 camera
1 small antenna
1 large antenna with cable
1 mounting foot with screws
Extra Camera
You can use up to 3 additional cameras within your solution. We recommend that you pair
the camera with your monitor before mounting it.
PairinG camera and monitor
1.
Mount the small antenna or the large antenna with cable on the backside of
the camera. We reccomend that you try using the small antenna first.
2.
Turn off the power in the vehicle. Connect the 12/24V power cable to a suitable
power source. Connect the horse shoe joint of the white-striped cable to the
positive pole (+) and the horse shoe joint of the black cable to the negative pole
(-) of the power source. Start the engine and turn on the power to the camera
power source. Make sure that the camera is supplied with power by checking the
power indicator.
3.
On the monitor, go to menu mode and go down to Pair Cam. Choose the channel
you wish to use for the new camera. (A channel not used by a camera you already
have installed.)
4.
Press the Pair camera button on the monitor. A 60 second countdown will start.
Within the 60 second countdown, press the pair button on the camera.
5.
Mount the camera in the desired position after making sure the signal strength is
good enough.
- +
12/24 V
Max 3 m
switchinG Between the cameras on the monitor
Make sure you have chosen the ON option in the menu for the cameras you wish to
switch between. Press the camera button to switch between the cameras. Cameras set
to OFF in the menu will not be displayed even though they are supplied with power.
Quad
Turn this option on to view all channels on a split screen.
contact us
For more information and support, visit: www.ludaelektronik.com
E-mail: service@ludaelektronik.se
Telephone: +46 (0)31 31 30 290
Address: LUDA Elektronik AB, Aschebergsgatan 46, SE41133 Göteborg, Sweden
© LUDA ELEktronik AB 2010 — USEr GUiDE ExtrA CAmErA trC — EnGLiSh