Publicidad
Idiomas disponibles
Idiomas disponibles
English
Please install the Utility Program first before insert USB Adapter into the
USB port of your computer.
Windows 2000/XP Utility and Driver Installation
1.
Insert the CD into the CD-ROM drive on your PC or Notebook.
2.
The autorun program should start automatically. If it does not, please run
autorun.exe under your CD-ROM drive
3.
Click Utility to start the Utility and driver installation. (Fig. 1)
4.
The Install Shield Wizard screen will appear. Click "Next" to continue.
(Fig. 2)
5.
If user wants to change the installation folder, press "Browse" to change
the directory or press "Next" to continue. (Fig. 3)
6.
Setup will add program icons to Program Folder. You may type a new
folder name, or select one from the existing folders list. Click "Next" to
continue. (Fig. 4)
7.
If using Windows XP, you may see a warning screen. If you do see this
screen, please click "Continue Anyway" (Fig. 5)
8.
Click "Finish" to complete the software installation. (Fig. 6)
9.
Restart computer to make the settings effective. (Fig. 7)
10. Insert the 108Mbps Wireless USB adapter into USB port when
PC/Notebook reboot has completed.
Found New Hardware Wizard screen will appear, select "Install the
software automatically", and then click "Next". (Fig. 8)
11. If using Windows XP, you may see a warning screen. If you do see this
screen, please click "Continue Anyway" (Fig. 9)
12. Click "Finish" to complete the hardware installation. (Fig. 10)
13. When first time starts the utility, you will see the Wireless Configuration
Utility Country Selector, select the country domain where you are using
this Wireless device, users are responsible for ensuring that the region
domain configuration is in compliance with the regulatory standards of
these countries. (Fig. 11)
.
Warning: Be noted that selecting the incorrect region may
Publicidad
