Avaya WLAN AP 8120 Manual Del Usuario página 31

The ceiling grid adaptor comes with two interlocking bracket parts. The larger bracket includes
keyhole shaped slots which mate with tabs on the under surface of the AP and a threaded hole
that mates with the captive thumbscrew on the AP. The smaller bracket also includes a captive
fastener and it can be oriented with respect to the larger bracket in two different ways
corresponding to narrow or wide ceiling grids.
Perform the following procedure to install the access point with a ceiling grid adaptor:
Procedure
1. Secure a safe work environment. Obtain a ladder that allows easy access to the
2. Identify an appropriate location on the ceiling grid where the ceiling T-bars are safely
3. Mount the larger bracket to the grid. While installing, pay attention to the width of
Avaya WLAN 8100 Regulatory Information - WLAN AP 8120 with External Antenna
ceiling grid system.
accessible and where the ceiling tiles can be temporarily elevated and cleared away
from the work area. The adaptor bracket assembly is intended for use with the thin
section grid runners, not the thicker section runners used to cross large spans. To
provide access for hands and tools, use a pair of pencils or sticks to hold up the
ceiling tiles out of the grid. Doing this provides easy access for securing the bracket
to the grid.
the grid strip in order to ascertain the appropriate orientation for the smaller bracket
which is installed next.
Installing the WLAN AP 8120 with External Antenna to the ceiling
March 2012 31