Symbols On The Chain Saw; Symbols Operating Instructions; Proper Use; Residual Risks - ATIKA KS 1800/35 Manual Original

Symbols on the chain saw

Read and follow the operating instructions and
safety advices before starting up the machine.
Switch off the motor and disconnect the mains plug
before performing cleaning, maintenance or repair
work.
When connecting cable is damaged or cut through
immediately pull out the power plug.
Wear hardhat, eye and ear protection.
Wear protective gloves.
Do not expose to rain. Protect against humidity.
Guide bar length (cutting length) 356 mm
Machine of the protection class II (double
insulated)
This product
regulations specifically applicable to it.
Electrical devices do not go into the domestic
rubbish. Give devices, accessories and packaging
to an ecofriendly recycling.
According to the European Directive 2012/19/EU
on electrical and electronic scrap, electrical
devices that are no longer serviceable must be
separately collected and brought to a facility for an
environmentally compatible recycling.

Symbols operating instructions

Potential hazard or hazardous situation. Failure to
observe these instructions may lead to injuries or
cause damage to property.
Important information on proper handling. Failure
to observe these instructions may lead to malfunction.
User information. This information helps you to use
all the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Important notes for evironmentally compatible
conduct. Failure to observe these instructions may
lead to environmental damage.
The numbers refer to the figures on the pages 3
through 6.
20
complies with European

Proper use

The chain saw is suitable for
− sawing of trunks, perches, wood trusses, boards etc.
and can be used for transverse or longitudinal cuts.
− Chopping down of trees.
Do not use the chain saw for sawing of building materials
and synthetic materials.
The chain saw is only suitable for the private use in the
house and hobby garden.
The chain saw is not suitable for forestry works (chopping
and cutting off of perches in the forest). The necessary
safety of the operator is not guaranteed by the cable joint.
The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included
in the instructions.
Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.

Residual risks

Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety advices" and the
"Intended usage" as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will
reduce the risk of personal injury or damage to the equipment.
Risk of kickback when touching the guide bar tip with a hard
object.
Risk of injuries of fingers and hands by the tool (saw chain).
Injury by catapulted workpiece parts.
Electric shock.
Risk from electricity when using improper electrical
connections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
Risk of fire.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.

Safety instructions

General Power Tool Safety Warnings
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.