Kärcher Senso Timer ST6 eco!ogic Manual De Instrucciones página 19

Initial startup control unit
During the initial startup, it can individually
be selected for each water outlet how it is to
be operated:
 Sensor-controlled
The sensor is taught during the 60-sec-
ond countdown, i.e. the radio signal is
detected automatically.
 Time-controlled
The teaching process of the sensor is
cancelled with the esc/menu button
during the 60-second countdown.
In this case, the moisture tripping limit
at the control unit can not be set.
 Locked / inactive
Note: The predefined order during the initial startup must be strictly observed. Otherwise
it is not guaranteed that the sensor is correctly registered with the
control unit.
Note: The battery is not included in the scope of delivery.
The 60-second countdown passes
completely without the recognition of
the sensor or the esc/menu button be-
ing pushed, then the water outlet is in-
active. After deactivation of water outlet
1, the countdown for outlet 2 can be en-
abled with the OK button.
 Insert the battery into the battery compartment in
the correct position (observe +/- marking).
 As soon as the battery is inserted, the display, after
a short self-test, changes directly into the settings
mode for the current time. The hours of the time
display are flashing.
– 3
EN 19