Perel CTH407 Manual Del Usuario página 4

3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last
pages of this manual.
 Familiarise yourself with the functions of the device before actually
using it.
 All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
 Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
 Do not use outside the technical specifications.
 Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1 on-off switch
2 working LED
3 program LED
5. Installation
Make sure to cut off the mains power supply
1. Choose your installation spot. Install the thermostat in a well-
ventilated place and about 1.5 m (5 feet) above the floor, away
from direct sunlight, heat and interference sources.
2. Remove the front cover using an appropriate screwdriver.
3. Mount the thermostat on a flat surface. Drill two 6 mm holes and
insert a nylon anchor plug in each hole. Drill two 2.6 mm holes
when mounting the thermostat on a wooden surface.
V. 01 – 10/05/2016
CTH407
WARNING
before installing the thermostat.
4 SET knob
5 PROGRAM button
4 ©Velleman nv