Intended Use; Assembly & Operation - Worx WG605 Manual Del Usuario

Power cord length
Protection class
Machinery weight
ACCESSORIES
40°Nozzle
Soap Nozzle
Turbo Nozzle
20ft Hose
Declogging needle
We recommend that you purchase your accessories listed
in the above list from the same store that sold you the tool.
Refer to the accessory packaging for further details. Store
personnel can assist you and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.

INTENDED USE

The electric high pressure washer is intended for residen-
tial cleaning projects-from porch to patio, driveways and
decks, boats, pavers, bricks, BBQs and more.
ASSEMBLY & OPERATION
ACTION
ASSEMBLY
Attach the lance to the wand.
Note: when attaching, align the
two projections on the lance with
the grooves on the wand.
Attach the wand holder
Screw& Unscrew the high
pressure hose
Note: Make sure the hose is
tightly connected.
Note: For convenience of
unscrewing the hose, please
pull the trigger to drain water
from wand when operation is
completed and switch is in "O"
position.
Electric Pressure Washer
35 ft (10.5 m)
/ll
17.2 lbs (7.8 kg)
WG605
1
1
1
1
1
FIGURE
See Fig. A1 ,A2
See Fig. B1 B2
See Fig.
C1,C2,C3,C4
Attach the garden hose
Connect one end of the home
garden hose (not supplied) to
the adapter and another end to
waterspout.
OPERATION
Extension cord
It is not recommended to use
the extension cord. If neces-
sary, ensure the plug and ex-
tension cord connection is on
an elevated surface that does
not contact the water area.
GFCI plug test
Press "test", the light will be out.
Press "reset", the power regains
and the light will illuminate.
Note: To keep good operation
of GFCI, please implement it
once a month.
START/STOP
Turn on the water supply tap.
Connect the washer to the power
supply and turn the switch to
"I"position. Then press trigger
Note: Before pressing trigger,
Push the lock-out down into
the trigger.
WARNING: Do not start
the machine without
connecting and
turning on the water supply
because it may cause damage
to high pressure seals and
reduce the service life of
pump.
Release the trigger and turn the
switch to "O"position. Turn Off
the water supply tap
Note: When not in use, Push
the lock-out up until it clicks
into the slot.
Select the right nozzles
Select the suitable nozzle for
different cleaning jobs.
Nozzle 40 (white) is applicable
0
for cleaning on wooden and
other soft objects .
Turbo nozzle is applicable for
cleaning concrete, bricks and
masonry.
The soap nozzle is applicable for
soaping while other nozzles can-
not be used to do it.
WARNING: Do not
change the nozzle
pattern when the tool
is powered on.
See Fig. D
See Fig.E
See Fig. F
See Fig. G1,G2
9
See Fig.H1,H2
See Fig.I
EN