User's Manual
E N
User Manual mini stage lights
Warning:
1. This device must be used in accordance with these instructions.
2. This device is intended solely for internal use and should be protected against
water, moisture and shaking.
3. Operating temperature of this device is 15-300C and have to be disconnected
from the power supply after the continuous operation for 2 hours to allow cooling
of the laser diode.
4. The housing of this unit should be kept clean in order to avoid unnecessary
problems.
5. Do not frequently turn on and off this unit, and avoid its operation over
extended periods of time.
6. Do not use the telescope to watch the laser rays, which can cause potential
problems.
7. During transport, we recommend using the original packaging.
Warnings:
1. Laser class for this equipment is Class III B and is dangerous in case of direct
exposure to the eyes.
2. The operating voltage is 110-240V / 50-60HZ, exceeding this range will shorten
the lifespan of the product.
Statement:
All projectors are thoroughly checked before shipment. Therefore, you should use
the machine in strict accordance with the instructions. Distributor shall not be
liable for any errors caused by improper use.
Specifications:
1. Power: AC power input AC 110V-240V / 50-60Hz, output 5.0 V 1A
2. Generator laser: wavelength of 532nm, power 50mW, wavelength 650nm,
power 100mW
3. Size: 130 * 92 * 52mm
4. Weight: 0.6 kg
4