LUTEC 12513LE-SL Manual Del Usuario página 8

Installation: Concrete Pad
With the help of another person, place the pole
a ssembly over Concrete Mounting Bracket (I)
and Anchor Bolt (J). Secure with Cap Nut (G)
and Washer (H). Tighten with a 1/2 inch
wrench (not included).
CAUTION: Allow the concrete to dry before
installing the pole assembly.
Installation: Wood Deck
Mark 3 points on the deck by
using the fixture base holes.
CAUTION:The thickness of the
deck must be greater than
10mm or about 1/2" thick.
Installation: Ground Stake
With the help of another person, place the pole
a
Secure with Cap Nut (G) and Washer (H).
Tighten with a 1/2 inch wrench (not included).
Drill with a suitable drill bit.
8
ssembly over Ground Base Insert (K).
R
Secure the pole base assembly
to the deck by tightening 3
hex-head self-drilling screws (R).